Nanosized Carbon Macrocycles Based on a Planar Chiral Pseudo Meta-[2.2]Paracyclophane

Structural designs combining cycloparaphenylenes (CPPs) backbone with planar chiral [2.2]paracyclophane ([2.2]PCP) lead to optical-active chiral macrocycles with intriguing properties. X-ray crystal analysis revealed aesthetic necklace-shaped structures and size-dependent packages with long-range channels. The macrocycles exhibit unique photophysical properties with high fluorescence quantum yield of up to 82 %, and the fluorescent color varies with ring size. In addition, size-dependent chiroptical properties with moderately large CPL dissymmetry factor of 10⁻³ and CPL brightness in the range of 30–40 M⁻¹ cm⁻¹ were observed.     

Electro-assisted Molecular Assembly Giving Atomic-Scale Catalytic Active-Site Detection

The artificially accurate design of nonmetal electrocatalysts’ active site has been a huge challenge because no pure active species with the specific structure could be strictly controlled by traditional synthetic methods. Species with a multiconfiguration in the catalyst hinder identification of the active site and the subsequent comprehension of the reaction mechanism. We have developed a novel electro-assisted molecular assembly strategy to obtain a pure pentagon ring on perfect graphene avoiding other reconstructed structures. More importantly, the active atom was confirmed by the subtle passivation process as the topmost carbon atom. Recognition of the carbon-defect electrocatalysis reaction mechanism was first downsized to the single-atom scale from the experimental perspective. It is expected that this innovative electro-assisted molecular assembly strategy could be extensively applied in the active structure-controlled synthesis of nonmetal electrocatalysts and verification of the exact active atom.     

Investigation of Heisenberg algebra for a modified anti-de Sitter and modified antiSnyder models

In this paper,we consider a possible modification of the de Sitter and anti-de Sitter space for the extended uncertainty principle.For the modified anti-de Sitter model we discuss the representation and wave functions of the momentum operator for a one-dimensional box problem.Also,we consider modified Snyder and anti-Snyder models for the generalized uncertainty principle.Then,we assume the Hamiltonian with different potential and solve the Heisenberg algebra for the modified(anti)-de Sitter and(anti)-Snyder models in both position and in the momentum space.     

SU-8光栅结构中的液晶激光特性

设计制作了SU-8光栅结构的染料掺杂手性向列相液晶激光器件,在器件正面和侧面均实现了随机激光辐射。将激光染料PM597、手性剂S-811、向列性液晶TEB30A按一定比例均匀混合,注入反平行摩擦处理的液晶盒中,器件的下基板通过光掩模法刻蚀出周期为15μm的光栅。利用532 nm的Nd∶YAG固体脉冲激光器作为泵浦源,器件的侧面既在580~590 nm范围内出现了多个离散分立的随机激光辐射峰,FWHM约0.19 nm,又在579~585 nm范围内出现独立的两个激光辐射峰,FWHM约0.19 nm;在器件正面获得了584~590 nm范围的随机激光辐射谱,FWHM约0.17 nm。加热器件至61℃,液晶相变为各向同性态,器件侧面仍出现了波长约590.60 nm、FWHM约0.24 nm的激光辐射峰。分析得出,液晶盒中引入SU-8光栅结构后,光子同时在液晶分子间多重散射和SU-8光栅中布拉格反射获得反馈放大,两种机制相辅相成。器件侧面出现的独立激光辐射峰主要由SU-8光栅布拉格反射提供反馈放大形成,而器件侧面和正面的随机激光辐射峰主要由液晶分子间多重散射提供反馈放大形成。     

基于深度学习的ELM实时识别研究

基于深度学习的方法，在HL-2A装置上开发出了一套边缘局域模(ELM)实时识别算法。算法使用5200次放电数据(约24.19万数据切片)进行学习，得到一个深度为22层的卷积神经网络。为衡量算法的识别能力，识别了HL-2A装置自2009年实现稳定ELMy H模放电以来所有历史数据(约26000次放电数据)，共识别出1665次H模放电，其中误识别35次，误报率为2.10%。在实际的1634次H模放电中，漏识别4次，漏识别率为0.24%。该误报率和漏报率可以满足ELM实时识别的精度要求。识别算法在实时控制环境下，对单个时间点的平均计算时间为0.46ms，可以满足实时控制的计算速度要求。     

Near-infrared absorption enhancement for perovskite solar cells via the rear grating design

Optical and Quantum Electronics - The features of laser shock peening technology was studied in relation to the physical processes occurring during and after laser treatment. The effect of laser...     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明，对于[ScO(CO₂)_n]⁺体系，在n≤4时，形成了溶剂化结构；在n=5时，形成了碳酸盐结构，实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系，需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中，只发现了溶剂化结构，没有观察到碳酸盐结构. 理论计算表明，[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒，[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

Nonlinear modes in spatially confined spin–orbit-coupled Bose–Einstein condensates with repulsive nonlinearity

Nonlinear Dynamics - It was found that spatially confined spin–orbit (SO) coupling, which can be induced by illuminating Bose–Einstein condensates (BECs) with a Gaussian laser beam, can...     

输电铁塔四地脚螺栓塔脚板抗拉承载力试验与计算方法研究

针对架空输电线路铁塔中常用的四地脚螺栓塔脚板进行了抗拉承载力试验和理论计算方法研究。首先,选取8个试件进行塔脚板抗拉承载力试验研究,分析塔脚底板板厚及有无加劲板对塔脚板抗拉承载力的影响;其次,通过有限元模拟塔脚板的应力分布情况,并结合“塑性分析,弹性设计”的思想,提出了一种基于屈服线理论的四地脚螺栓塔脚板抗拉承载力计算公式;最后,与试验结果、有限元仿真结果、已有技术规定中的计算结果进行了对比。结果表明:建议公式与试验结果和仿真结果较为吻合,相关技术规定中的计算结果偏于保守,验证了本文建议公式的精确性;底板厚度和加劲板的作用对塔脚板承载力影响较大。研究结果可为输电铁塔四地脚螺栓塔脚板结构设计提供参考。